The first step in using the device is to hit the start button on the controller and then move the function switch of the upright to the “automatic” position. Every single step of the operating process will be carried out automatically. (2) Once the execution of the whole operation is complete, the concrete mixer will be turned off automatically. In the event that the mixer has to be stopped on the halfway point of its run, hit the stop button and then resume it. (3) After pressing the start button, the display on the screen will provide information about the time, low speed, charging sand, fast, stop, fast, and functioning signal pghts, all of which will be glowing simultaneously. 4. Position the manual switch to the stop position while the machine is working automatically. (2) Announcements: (1) The gap between the blade and the pan wall is measured to be 3mm\u00b12mm using a measuring gauge. If the gap is excessive, it is necessary to modify the position surrounding the blade in order to attain the precise PMI range. Please ensure to clean the blade and drum of the concrete mixer as soon as it has finished being used. Avoid shocking the electrical components of the concrete mixer by preventing them from coming into contact with water, extreme temperatures, and dust. The concrete mixer technique of applications should be simplified in order to get a greater level of work efficiency.<\/p>\n","protected":false},"excerpt":{"rendered":"
The first step in using the device is to hit the start button on the controller and then move the function switch of the upright to the “automatic” position. Every single step of the operating process will be carried out automatically. (2) Once the execution of the whole operation is complete, the concrete mixer will be turned off automatically. In the event that the mixer has to be stopped on the halfway point of its run, hit the stop button and then resume it. (3) After pressing the start button, the display on the screen will provide information about the time, low speed, charging sand, fast, stop, fast, and functioning signal pghts, all of which will be glowing simultaneously. 4. Position the manual switch to the stop position while the machine is working automatically. (2) Announcements: (1) The gap between the blade and the pan wall is measured to be 3mm\u00b12mm using a measuring gauge. If the gap is excessive, it is necessary to modify the position surrounding the blade in order to attain the precise PMI range. Please ensure to clean the blade and drum of the concrete mixer as soon as it has finished being used. Avoid shocking the electrical components of the concrete mixer by preventing them from coming into contact with water, extreme temperatures, and dust. The concrete mixer technique of applications should be simplified in order to get a greater level of work efficiency.<\/p>\n","protected":false},"author":20,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[226],"class_list":["post-10907","post","type-post","status-publish","format-standard","hentry","category-camping","tag-camping"],"yoast_head":"\n